Patio and Lanai Screen Repair in Melbourne, FL

Protect your outdoor retreat with lanai screen repair in Melbourne, FL. We fix sagging, torn, or punctured screens on patios, lanais, and porches. Our technicians replace damaged mesh and hardware so your enclosure looks neat and functions like new again.

Melbourne Screening provides professional lanai screen throughout Melbourne, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 321-449-7928 or request your free quote.

Practical lanai screen repairs for Melbourne, FL homes

If you live in Melbourne, FL, you already know how fast patio and lanai screens can wear out in our coastal weather. At Melbourne Screening, we focus specifically on fixing and upgrading screened patios, lanais, and pool enclosures around the Space Coast, from older ranch homes near historic downtown Melbourne to newer builds in Viera and West Melbourne.

When we arrive, we start with a walk‑through of your patio or lanai. We look for torn mesh, popped spline (the rubber that holds the screen in the frame), bent or corroded aluminum members, and loose doors or hardware. We also check the attachment points where the enclosure meets the house wall or concrete slab, since those areas often fail first in Florida’s sun and storms. You get a clear explanation of what is worn out, what can be repaired, and what should realistically be replaced so the problem does not come right back.

Because most Melbourne homes are in HOA or deed‑restricted communities, we also pay attention to appearance. We match existing frame colors, screen tone, and door styles as closely as possible so repairs look like they were always part of the original enclosure, not a patch job.

How patio and lanai screen repair actually works

Good lanai screen repair is more than just cutting out a torn panel. Once you approve the estimate, Melbourne Screening starts by clearing the work area and protecting surfaces. We move furniture, grills, and potted plants away from the walls to prevent damage and to give us room to stretch new screen tight and even.

For individual panel repairs, we remove the old spline with a pull tool, cut out the damaged screen, and inspect the aluminum track underneath. If the track is clogged with paint, sand, or corrosion, we clean it so the new spline can grip properly. We then roll new screen into the frame with a spline roller, pulling it evenly in both directions to avoid ripples. Corners are carefully trimmed so the edges stay tight in Florida wind and do not pull loose at the first storm.

If your lanai frame has shifted or twisted, which is common in older concrete slabs around Melbourne, we may need to adjust or brace sections of the structure before screening. On many patios we resecure loose kick plates, replace missing fasteners, and adjust screen doors so they latch properly and the bug sweep seals against the threshold.

For large overhead sections on pool and lanai enclosures, technicians use ladders and walk boards set on the frame where it is structurally safe. We replace roof panels one bay at a time so the structure stays stable and your property is protected. All debris from old screens and spline is swept up and hauled away before we leave.

Screen material options for Melbourne’s coastal climate

Melbourne’s salty air and sun are tough on standard window screen, so choosing the right replacement mesh matters. At Melbourne Screening, we carry several options that work well in our area and we help you pick based on what you actually use your patio or lanai for.

Standard fiberglass screen is the most budget‑friendly and is fine for shaded patios and smaller lanais that are somewhat sheltered from direct wind. For larger or more exposed enclosures, we typically recommend a heavier 18/14 or 20/20 fiberglass specifically rated for pool and patio use, which handles Florida wind gusts better and resists stretching.

If you back up to a canal, preserve, or golf course, you probably deal with constant insects. In those cases we suggest tighter weave “no‑see‑um” screen that keeps out midges and sand flies. Around Melbourne Beach and Indian Harbour Beach, where breezes can be stronger, we often combine standard panels on upper sections with tighter mesh on lower walls so you get airflow up top and stronger bug control at eye level.

For homeowners with pets, we can install pet‑resistant screen in kick panels or lower sections where dogs or cats push and scratch. It costs more, but in spots near doors or corners it can save you from repeat tears. We also offer solar and privacy screen for west‑facing patios that get harsh afternoon sun. These darker meshes cut glare and some heat, which is useful for concrete lanais that bake in July and August.

What affects the cost of lanai screen repair in our area

Every patio and lanai screen job around Melbourne is a little different, so costs depend on several real‑world factors. The first is how many individual panels need replacement. Swapping a few torn wall panels is very different from rescreening an entire enclosure, especially if high roof sections are involved. Taller cages and multi‑level enclosures require more labor and safety setup, which adds to the price.

The mesh you choose also affects cost. Standard fiberglass is the least expensive. No‑see‑um, pet‑resistant, and solar screens all cost more per square foot, but can be a better value if you fight pests, pets, or heat every season. We explain the price difference in writing before work starts, so you can balance upfront cost against how you actually use your space.

Condition of the frame is another factor. On many 15 to 25 year old homes in Melbourne, especially near the river or beach, we find rusted fasteners, oxidized aluminum, or loose base plates. Simple corrosion cleanup and new screws are quick, but bent structural members or separated roof beams take more time. In some cases, small frame repairs can be handled during the same visit. If a section needs more extensive structural work, we lay that out as a separate line item.

Accessibility matters too. Tight side yards, enclosed courtyards, or cages that back up to water can change how we set ladders and walk boards. That can slightly increase labor time. Before we quote your patio or lanai screen repair, we walk the entire perimeter so there are no surprises when the final bill arrives.

What Melbourne, FL homeowners should know before hiring

Screen repair looks simple from the ground, but doing it correctly in Florida’s climate is detailed work. When you call Melbourne Screening, we encourage you to ask specific questions, such as whether old spline will be fully replaced, what mesh type is being quoted, and how roof access will be handled. A detailed written estimate that lists materials, approximate square footage, and any frame repairs is a good sign you are dealing with a careful contractor.

Check that the company is familiar with Brevard County weather patterns and local building styles. Homes near the Indian River, along US‑1, and in neighborhoods like Suntree and Viera experience different wind exposure and salt levels than homes further inland. This affects which screen and fasteners last the longest. We choose stainless or coated hardware near the coast, and adjust mesh type for heavily wooded lots that collect debris on roof panels.

Before your appointment, it helps to clear furniture, kids’ toys, and planters at least a couple of feet from the screen walls if you can. This keeps your belongings safe and speeds up the job. Let us know about any irrigation timers, electrical outlets, or fragile decor attached to the frame so we can protect them while we work.

After the repair, most screens are ready for normal use immediately. We recommend avoiding power washing directly on new screen panels and instead rinsing with a garden hose to extend their life. With the right mesh and proper installation, most Melbourne patios and lanais can go many years before they need major rescreening again.